Question: How is Marty able to play a 1980s videotape on a 1950s television set? Is this just another example of Doc's ahead-of-his-time inventiveness?
Captain Defenestrator
23rd Aug 2009
Back to the Future (1985)
Answer: Video tape system back then could output an NTSC video signal, just like broadcast at the time, and up to HD in the 2000s. Usually there was a switch on the video device to change the output frequency between channels 3 or 4. Depending on what was an open channel in your area.
Join the mailing list
Separate from membership, this is to get updates about mistakes in recent releases. Addresses are not passed on to any third party, and are used solely for direct communication from this site. You can unsubscribe at any time.
Check out the mistake & trivia books, on Kindle and in paperback.
Answer: The video camera was in the DeLorean. With the right kind of adapter, which was common enough in the 80s that Doc might've had it on the camera or been able to jury-rig something in the 50s, it would have been possible to connect it into the antenna screws in the back of the TV like an old Atari and play it directly from the camera.
Captain Defenestrator
TVs in the 50s had a two prong antennae connection (two screws in the back that you put a prong antennae into) TVs in the mid 80s also had this. The coax connection (the one wire that screws in) was starting to become common, but, the two prong connection would have been more likely on any given TV at the time, so, whatever wire they used to preview recordings probably had that. very convenient that Marty brought those cords with him.
An old Atari 2600 RF Adapter would be how one would link a video camera to an old-fashioned television. A simple-enough part that Doc could probably make one with 1950s technology.
Captain Defenestrator